|
Welcome
to
Specialist Industrial Coatings Ltd (SICL)
Specialist
Engineers in Corrosion and Erosion Preventive Treatments
Offering
an Innovative approach to Problem Solving and Solution Development
Industrial
Flooring & Anti-Slip Safety Surfaces
Secondary
Containment Lining Services
Tank
& Vessel Lining Service
|
|
| Specialist Industrial Coatings are leading installers of resin based surface treatments for Flooring, Tank Lining and Secondary Containment. With over 30 years of experiecnce within this indusrty, we are able to provide you with an unbiased soloution to your fit your businesse or Domestic needs. |
|
Industrial Flooring:
By
combining the latest technological advances with years of expertise in
the field, we offer a specialised service to cater for all your industrial
flooring needs. We deal with any industrial surface, anywhere in the UK,
including all factory and workshop floors, miscellaneous production areas,
loading bays and concrete surfaces for both forklift truck and pedestrian
traffic.
Indoors
or out, our highly trained technicians can provide you with a surface
that is safe, non- slip, chemical resistant and hygienic.
If
you have potential trip hazards on uneven surfaces, or areas that are
slippery and dangerous when wet, including galvanised steel checker plate
stairs, steps & fire escapes - we can help. We can provide a slip
resistant surface that is safe.
Measuring
and assessing the surface roughness of your flooring as part of your slip
risk assessment. We can provide a service using portable surface roughness
and slip resistance instruments that allows us to measure, analyze and
assess the surface of your flooring and to provide you with quantifiable
report to support your flooring slip risk assessment.
Our flooring systems are normally based on epoxy resins, MMA’s,
polyurethane and polyurea coatings.
It’s
not worth slipping up on Health and Safety matters – leave it to
SICL to provide the fast, effective and permanent solution.
Secondary
Containment Lining Services:
Although
many bulk storage tanks are now located within a secondary containment
bunded area, many have been constructed from materials that are not resistant
to the chemicals that are being stored in the tanks or vessels located
within them. In many situations the concrete is porous.
|
|
At
SICL we offer a service of secondary containment bund lining solutions.
These are resistant to a wide range of chemical products used in industry,
including aggressive and harsh chemical environments as well as relatively
inert chemicals.
With time-efficiency and convenience at heart, we also have a range of
ultra-fast hardening polyurea materials that are completely elastmeric
and flexible for treating areas that are located on unstable surfaces
such as loose shale. These areas can be walked upon within minutes following
application.
It is essential that all liquid materials are stored correctly and safely
and in the event of spillage or an accident, aggressive and harsh chemicals
will be contained in the catchment area and recovered with the minimum
of losses.
These measures are particularly important when considering that the Environment
Agency and Europe are taking an ever closer watch regarding the Control
Of Major Accident Hazard prevention (COMAH) and in the event of an incident
of the effect it would have on the environment.
Our secondary containment linings are normally based on epoxy resins,
vinyl ester resins, biphenyl ester resins, fibreglass laminates and glass
flake technology.
We also supply our own QA and inspection service checking the condition
of new and existing bund linings, including the coating thickness and
micro-porosity.
Tank & Vessel
Lining Services:
We
offer a comprehensive service for the on-site lining for all types of
industrial storage and process tanks.
We are able to carry out a range of different surface preparation treatments
prior to applying the new lining system.
We have lining materials suitable for potable water and food contact applications.
We have materials suitable for a wide range of chemical and temperature
environments.
We have a range of materials can be applied to a wide range of different
substrates including mild steel, stainless steel, fibreglass and concrete.
We
have materials that can even be applied underwater.
We
have materials applied to damp concrete surfaces and to very new “Green”
concrete.
We
even have a dust-free Nu-Tank potable water lining tank system with a
48hr return to service.
We
have our own QA and Inspection service to check the condition of tank
linings, including the coating thickness and micro-porosity.
|
|
Drawing
on years of international experience in corrosion prevention, we offer
a specialised, comprehensive service for the on-site lining for all types
of industrial storage and process tanks, no matter how big or small.
Applying an internal lining to a tank in-situ is always more cost-effective
than replacing the tank and is certainly more environmentally friendly.
At SICL we understand, however, that the ongoing purity of the contained
product itself is your first and foremost priority.
By
adding neutral linings to the internal surfaces of your vessel, we are
able to guarantee the safe containment of your product with zero contamination.
To
ensure the maximum lifespan of our service to you, our range of impervious
internal linings bond permanently to mild and stainless steel, fibreglass
and all types of concrete. This guarantees that the lining will last the
lifetime of the vessel.
Incorporating
the latest technology in corrosion prevention, we can offer you the most
time-efficient solution to any storage vessel problem, with the minimum
amount of disruption. We use materials and techniques suitable for a wide
range of chemical and temperature environments, including underwater applications;
we even have a dust-free Nu-Tank potable water lining tank system with
a 48 hour return to service.
Our tank lining materials are normally based on epoxy resins, vinyl ester
resins, biphenyl ester resins, MIO, fibreglass laminates and glass flake
technology. |
|
| In addition to
this, we also supply our own QA and inspection service checking the condition
of new and existing tank linings, including the coating thickness and
micro-porosity. |
|
| For a more detailed
outline of our services, please click on of the options at the top of
the page. To access our Help Section or Search this site, please hit the
“Help/Search” button at any time. |
Last
Updated 18/06/08 |
| |
